6000BPH Complete Fruit Juice Processing Line / Juice Production
Line / Juice Filling Machine
1.The filling line is mainly used in the beverage filling
operations. The three functions of bottle wash, fill and seal are
composed in one body of the machine. The whole process is
2.The machine is used in filling juices,beverage in bottles made of
polyester and plastics. The machine can also be used in hot filling
if being installed with temperature controlling device. The handle
of the machine can be freely and conveniently turned to adjust the
machine to fill various types of bottles.
3.The filling operation is faster and more stable because the micro
pressure filling operation of the new type is adopted. There the
output and benefit of the machine is higher than the machinery of
the same specifications.
4.The advanced OMRON programmed controller (PLC) is adopted to
control the machine to run automatically while a transducer is used
in the bottle -entering chains to adjust speeds and coordinated
with the transducer of the main machine to make the operations of
moving bottle forward steadily and reliably.
5.It is convenient to operate with higher automation because every
part of the machine is inspected to run with photo electricity, On
the bases, the filling parts of the machine can be changed into
filling methods of lower vacuum.
Product Features -
1. The whole machine adopts the design of stuck bottleneck
suspension operation mode so that the bottle is stable and reliable
under high-speed operation, and at the same time, the number of
changed parts is greatly reduced, making it more convenient and
fast when changing the bottle type.
2. A new generation of stainless steel flip bottle clamp is adopted
so that the clamp does not contact the upper part of the thread of
the bottle mouth, and a spray head is provided so that the inner
wall of the bottle can be rinsed fully without dead corners.
3. Adopting advanced gravity filling principle, the filling is
fast, stable, and accurate.
4. Adopt magnetic torque type capping head to realize capping and
capping. The capping torque is infinitely adjustable, the sealing
is tight and reliable, and the cap is not hurt.
5. The whole machine adopts man-machine interface touch screen
buttons, PLC computer control, and is equipped with a cover missing
and overload protection alarm device, which can find and eliminate
faults in time and have a high degree of production automation.
6. The parts in contact with water are made of high-quality
stainless steel, and the main electrical components are all
products of well-known international manufacturers.
This juice glass bottle filling and capping machine adopts advanced
SIEMENS Programmable logic controller (PLC) to control the
automatic running of the machine. The input bottle adopts air
conveying device; the output bottle adopts adjustable speed way,
which combines with the transducer of the host machine making the
output bottle running more stable and reliable. The photoelectrical
inspection of the running condition of various parts makes a higher
automation and convenient operation. It is the ideal first-choice
equipment of beverage manufacturers.
- Into bottle way is air conveyor direct connection with bottle
- All 304/316 stainless steel rinse heads, water spray style inject
design, more save water consumption and more clean.
- 304/316 Stainless steel Gripper with plastic pad, ensure minimal
bottle crash during washing.
- 304/316 stainless steel washing pump make the machine more
- 304/316 Stainless steel high precision filling nozzle
- Filling volume adjustable in fine rank, same liquid level after
- All 304/316 stainless steel contact parts & liquid tank, fine
polish, no death corner, easy to clean
- 304/316 stainless steel filling pump
- Efficient spray nozzle rinse thoroughly and save water for
- Place and capping system, electromagnetic capping heads, with
burden discharge function, make sure minimum bottle crash during
- All 304/316 stainless steel construction
- No bottle no capping
- Automatic stop when lack of bottle
- Capping effect is stable and reliable, Defective rate ≤0.2%
- Air conveyor is fixed on the floor, with fan installed on the
- Air filter is positioned at every entrance of air fan, to prevent
dust blown into bottles.
- Bottles are held on the neck in the conveyor and transported into
filling machine by blowing power.
- All are made of stainless steel SUS 304 /316.
- Rack made by high quality carbon steel welded.
- Energy saving. High efficient. Adapt to customer factory layout
- Special lubrication system, keep products clean, health, safety
- Extended service life
- Electric eyes design keep whole line running safety and quickly
- Overload protection mechanism to effectively ensure the safety of
|Diameter of bottles :50-100mm|
|Height of bottle :100-300mm|
Zhangjiagang City Bievo Machinery Co., Ltd. is located in a
national level development zone - Zhangjiagang Economic And
Technology Development Zone, covering area more than 8,000 square
meters.We enjoy convenient transportation with Shanghai Hongqiao
International Airport and Shanghai Pudong International Airport on
hand.Which accumulated a great number of China's top technologists
in the liquid beverage industry.We have complete system from
designing, manufacturing, installation, training to after
service.Our main product water production line, carbonated beverage
production line . Fruit juice and milk production line ,3 to 5
gallons production line, daily chemical production line and so
on.Plat and tube UHT device, CIP system.All the products are sold
well.We devote ourselves to the development, research and
production of liquid food and beverage filling and packing industry
Q:Are you a manufacturer or trade company?
A:We are a manufacturer in beverage machine field more than 15
years, located at Leyu town,zhangjiagang,2 hours from Shanghai,1
hour from Wuxi by car. We will pick you up to visit our factory.
Q:Do you have any certification? A:SGS,ISO,CE Q:What about the
A:Usually 40 Working days
Q:What about the machine’s capacity?
A:2000-20000 bottles in 500ml per hour.
Q:The after-sale service
A:24 months warranty. solve basic questions by telephone, email,
whatsapp, wechat and video call. Engineer will go to buyer's
factory to install, test machines, and train buyer's staff how to
operate, maintain machines. Operating manuals will be sent with
machine or by email. We also have overseas service center
Q:If our bottle size changes, can we just do some adjustment on
machine according to our new bottle?
Q: If I want to buy a machine, what information do I need to tell
you, do you need from me?
A:a. What kind beverage you want to produce? b. bottle volume?
250ml, 330ml, 500ml, 750ml, etc.? c. Producing capacity
requirement? How many bottles per hour? d.Raw water analysis report
. e.Voltage and altitude.
Q:What kinds of product you supply?
A: Drink water/juice/carbonated drink filling line. 5 gallon/20L/
can beverage/glass bottle beverage filling line Water treatment
system. Bottle blowing making machine. After packing system(label
machine, PE film shrink packing machine, carton machine)
After equipment reached the workshop of customer, place the
equipment according to plane layout we offered. We will arrange
seasoned technician for equipment installation, debug and test
production at the same time make the equipment reach the rated
producing capacity of the line. The buyer need to supply the round
tickets and accommodation of our engineer, and the salary.
Our company offer technology training to customer. The content of
training is structure and maintenance of equipment, control and
operation of equipment. Seasoned technician will guide and
establish training outline. After training, the technician of buyer
could master the operation and maintenance, could adjust the
process and treat different failures.
We promise that our goods are all new and not used. They're made of
suitable material, adopt new design. The quality, specification and
function all meet the demand of contract. We promise that the
products of this line could storage for one year without adding any