5000BPH Automatic Carbonated Beverage Production Line / 3-In-1 Soft
Drink Filling Machine
Products Introduction Of Carbonated Soft Drink Beverage Filling
1. This kind of carbonated beverage filling machine combines
washing,filling and rotary capping functions in one unit.It is a
fully automatic and high efficiency liquid packing equipment.
2. carbonated beverage filling machine is suitable for packing
beverage containing gas. carbonated beverage filling machine 's
performance is as following all parts,for instance, filling valve,
which directly contact medium are made of stainless steel or
harmless material. So it conforms to the requirements of Food
sanitation. Sealing parts are made of heat-proofing rubber, in
order to meet the technique requirements of users to sterilization
at high temperature.
1. Using the wind sent access and move wheel in the bottle directly
connected technology; canceled screw and conveyor chains, this
enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology,
bottle-shaped transform not need to adjust the equipment level,
only change related the curved plate, wheel and nylon parts is
3. The specially designed stainless steel bottle washing machine
clip is solid and durable, no touch with the screw location of
bottle mouth to avoid secondary pollution.
4. The cylinder drive the valve the movements is accurate and
reliable. High-throughput, high-precision filling valve, filling
fast and accurate. Equipped the CIP loop and control procedures,
the equipment is easy to clean.
Technical Parameters Of Carbonated Soda Water Filling Machine :
Machines Details :
3 IN 1 Carbonated Soft Drinks Filling Machine
> 304 stainless steel frame
> Tempering Glass window, Clear & no odor
> Excellent start wheel design, easy change over parts
> Machine Base with anti-rust process, ensure the forever
> All seal where liquid may Leakage & base neck come with
rubber, water proof
> Manual lubrication system
- Into bottle way is air conveyor direct connection with bottle
- All 304/316 stainless steel rinse heads, water spray style inject
design, more save water consumption and more clean.
- 304/316 Stainless steel Gripper with plastic pad, ensure minimal
bottle crash during washing.
Filling Part :
The three-in-one unit completes the three processes of bottle
washing, filling and capping at one time, with little bottle wear,
accurate and stable transmission, and convenient bottle type
replacement. * The specially designed all-stainless steel bottle
washer bottle clamp is sturdy and durable, and does not touch the
threaded part of the bottle mouth to avoid secondary pollution of
the bottle mouth. * High-speed and large-flow gravity filling
valve, fast filling speed, accurate liquid level without liquid
Capping Part :
* All parts in contact with liquid are made of high-quality
stainless steel materials or food-grade engineering plastics, which
meet the national food hygiene standards. * The bottle bottom
support plate of the bottle output wheel adopts a spiral descending
method, and the height of the bottle conveyor chain is not required
to change the bottle shape.
|Technical Partment Of Carbonated Soda Water Filling Machine|
Zhangjiagang City Bievo Machinery Co., Ltd. is located in a
national level development zone - Zhangjiagang Economic And
Technology Development Zone, covering area more than 8,000 square
meters.We enjoy convenient transportation with Shanghai Hongqiao
International Airport and Shanghai Pudong International Airport on
hand.Which accumulated a great number of China's top technologists
in the liquid beverage industry.We have complete system from
designing, manufacturing, installation, training to after
service.Our main product water production line, carbonated beverage
production line . Fruit juice and milk production line ,3 to 5
gallons production line, daily chemical production line and so
on.Plat and tube UHT device, CIP system.All the products are sold
well.We devote ourselves to the development, research and
production of liquid food and beverage filling and packing industry
1.Can your factory provide he whole plant from A to Z?
Yes, we can provide the complete plant, from bottling making
plant,water purification plant,to filling packing plant.
2.Are all machinery your factory made?
Our factory make the water purification and filling packing
plants.we do not make the bottle making machinery,we have good
quality bottle making machinery partner,and we provide to customer
same long warranty time and good after service.
3.How can I know the machinery quality before i order?
First,we will invite you visiting our factory to check the machines
quality,and show the machines running for you in our factory.
4.What certificates you can provide?
Our factory provide the CE,SGS,ISO,and according to some
countries,we also can provide the PVOC, COC,SONCAP...etc.
Installation and commissioning
After the equipments arrived buyer's workshop, the buyer should
take it's place for each equipment according to the supplied
layout; the seller will send the experienced technician to guide
the installation and debugging and trail production, and fulfil the
designed capability within the designed time.
The seller will supply technical training to the buyer. The
training is includes: equipment structure and maintenance, control
and operation. After training, the technicians of the buyer will
grasp relevant operation and maintenance skills, and could adjust
the technologies more skilled, and can deal with all kinds of
malfunction in time.
1) After qualified of the equipment, the seller will supply one
year guarantee, control system one year guarantee, free charge for
wearing parts, and other spare parts with cost price. Within
guarantee period, the technicians who accepted training should
strictly obey the requirements asked by the seller to operate the
equipments and maintenance, to find the common malfunctions and
fault clearing in time; if the technicians of the buyer couldn't
solve the problems themselves, the after-sales department will
supply long range guide service by phone; if relevant measurements
couldn't solve the problems, the seller will send the technicians
to the buyer factory, clear the fault or relevant technical
problems on site, the charges will reference to the installation
and debugging charges.
2) After guaranteed, the seller will supply widely favorable
technical support, after-sales service for the lifetime: favorable
price for the wearing parts and other spare parts.